Hydraulic Motor Oms/BMS Brand Oms80 Oms100 Oms125 Oms160 Oms200 Oms250 Oms315 Oms400

     The OMS/2000/2K/HMS/BM5 series orbital hydraulic motor produced by JINJIA is one disc valve type gerolor motor,Advanced design of disc distribution flow, which can provide improved performance at low speed higher volumetric for the automaticalty compensate wear.

Double taper roller bearings permit high radial loads, can be used on heavy vehicles/machinery in traction drive applications

    OMS/2000/2K/HMS/BM5 series orbital hydraulic motors are widely applied in agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machine, cleaner, grass cutter,Winches, Conveyors, Slews, Sweeper Drives, Augers, Cutters, Mowers and Chippers.

      The  OMS/2000/2K/HMS/BM5 series orbit hydraulic motors can perfectly replace the following models:

Dan foss:OMS80,OMS100,OMS125,OMS160,OMS200,OMS250,ORS315,OMS400…etc.

Eaton:2K-80,2K-160,2K-195,2K-245,2K-305,2K-395…etc.

1.Intermittent means the entrance of the maximum pressure;continuous working pressure means the differential pressure.

2.Motor should not work under the highest pressure and the maximum speed.

3.The running time should not exceed 10% under interoittent working conditions.

4.The maximum working temperature is 80°.

5.The maximum allowable back pressure is 10MPa,but the recommended back pressure should not exceed 5MPa.a leaking pipes is needed when exceeding.

6.One hour running time under 40% of maximum working pressure is recommended before full capacity working.

7.Recommending N68 anti-wear hydraulic oil,viscosity37-73cSt,cleanliness ISO18/13.